Hello friends welcome to another article in this article we will learn about Haier Dc inverter Ac & Split Air Conditioner E14 E1 E2 Error codes so without wasting any time lets start our topic.
First of all start your Haier Dc inverter Ac &
Split Air Conditioner and wait for the error code to appear on the display.
E14 Error Code
the error code today we will discuss is E14 Whenever E14 error occur on the display of Higher Split Ac It means that Your Indoor Fan Motor is faulted. First of all check that Fan Motor is working If it is working. So it means that its Feedback is not getting generate then check its Feedback connectors if there is not any loose connection or If it is Alright
Then change the Fan Motor After changing the Fan Motor your error E14 will be finished But if you change the Fan Motor and despite this E14 error doesn't get finish. So it means that Your PCB is having problem get your PCB repaired.
So then your this issue will be Friends , Big one is a
supply connector Small one is a Feedback connector
E2 Error Code
And now the error code we will talk about that is E2. When E2 occur on your unit display It means that your Pipe Coil Sensor is faulted or sort circuited when you will change it Then E2 error will finish from your unit display And your unit will come back in its working condition And if still E2 error occur on your display.
So it means that Your circuit is having problem Get
your PCB repaired Then your this issue will be finish In PCB it is attach with
this connector And black wire is Pipe Coil Sensor.
E1 Error Code
Now the error code we will talk about is E1 you can see
on your display When E1 error occur on your unit display it means that
Your Room Temp Sensor is faulted or short circuited so
change its Room Temp Sensor Then your unit will come back in its working
condition But in case if error doesn't get disappear And if unit doesn't come
back in its working condition So it means that
Your PCB is having problem Get your PCB repaired And
like this you can solve the issue of E1 And your unit will come back in its
working condition In PCB it is attach in this connector This blue wire is Room
Temp Sensor And it looks something like this
Friends , I hope this article is really helpful for you
if you have any question about this article please mention on comment box.
Thanks for reading,